Table of Contents
Advertisement
1 Nov. '87
the
feed clutch
disassemble the
6. Remove
paper
[F] (1 "E" ring), and
clutch (see illustration).
7. Clean and lubricate the clutch spring with Mobil Temp. 78, then
assemble the clutch, making sure that the spring [H] is fitted correctly
(see illustration). Then fit the washer and the ratchet.
8. Reassemble all parts.
NOTE: a) Open the ratchet pawl [1] when re-installing the cam on the shaft.
b) Make sure the rod of the pick-up arm [C] is correctly positioned
in between the pick-up lever [J] (see illustration).
3-32
Advertisement
Table of Contents
