Table of Contents
Advertisement
1 Nov. '87
6. TRANSPORT AND FUSING
TRANSPORT BELT REPLACEMENT
6-1
1.
Open the front cover and remove the following parts:.
a) development unit
b) main charger corona
c) drum stay
d) cleaning unit
e) drum flange
f) d r u m
g) drum guide
h) transfer corona unit.
2. Remove the left inner cover (3 screws), open the exit cover and remove
the fusing cover (2 screws).
3. Unfix the front [A] and rear [B] stoppers (1 screw each) and take out the
transport unit [C] whilst holding up the registration guide [D].
4. Remove the front and rear pressure springs [E] (1 each), and remove
the front registration roller bushing [F] (1 "E" ring).
3-38
I
Advertisement
Table of Contents
