Table of Contents
Advertisement
[B]
Remove the toner hopper seaI [A], then install one toner cartridge [B].
31.
NOTE: Refer to the decal on the machine or the Operating Instructions for
the toner supply procedure.
32 .
For 240-volt areas, remove the rear cover (2 screws) and reposition the
220/240 -voIt connector on the ac drive board.
Load paper in the cassette, then set the cassette and the copy tray.
33. 9
34 .
Plug in the copier and turn on the main switch while pressing the
rotate, filling the toner hopper with toner.
Check the machine operation and the copy quality,
35
Fill out the New Equipment Condition Report.
36
This causes the toner agitator to
1-11
1 Nov. '87
Advertisement
Table of Contents
