Table of Contents
Advertisement
1 Nov. '87
8. OTHERS
8-1
TIMING BELT REPLACEMENT
1. Turn off the main switch and unplug the copier.
2. Remove the following parts:
a) development unit
b) charge corona unit
c) drum stay
d) drum flange
e) drum
f) main PCB (see 1-6 Reverse Clutch Damper Replacement).
3. Remove the paper feed solenoid (see 4-1 Pre-Transfer Lamp Replace-
ment) (2 screws), and disconnect CN2 (2p) on the CTB power pack and
CN604 (2p) on the AC drive PCB.
3 - 6 0
I
Advertisement
Table of Contents
