Switching The Pro2 Control Centre On/Off - Midas PRO2 Owner's Manual

Midas pro2 live audio system owner’s manual
Hide thumbs Also See for PRO2:
Table of Contents

Advertisement

Switching the PRO2 Control Centre on/off

Switching the PRO2 Control Centre on/off
Carry out the following to switch the PRO2 Control Centre on/off in a safe manner.
>> To switch on the PRO2 Control Centre
Before switching the PRO2 on, make sure that all monitor loudspeaker
power amplifiers are turned off or muted.
After connecting up the audio cables, carry out the following:
1
Plug one of the control centre's mains cables into a mains power outlet and then
connect the IEC plug to a mains inlet socket on the rear of the PRO2.
2
Do the same with other mains cable. Make sure you connect the mains cable
to a separate mains outlet.
3
Make sure that all monitor loudspeaker power amplifiers are turned off or muted
and then switch on both mains on/off switches, one after the other. Do not
switch them on simultaneously.
4
The control centre will power up; the GUI will display the default screens and all
the controls will be set to default. You are now ready to start using the PRO2
control centre.
>> To switch off the PRO2 Control Centre
1
Make sure you have saved any shows, scenes or settings you require (see
"Saving your show files to a USB memory stick" on page 91).
2
At the GUI, choose home
3
At the Shutdown ENTIRE system? prompt, click OK. This initiates the
shutdown down sequence.
During the shutdown sequence the GUI screens will shutdown and all of the LCD
select buttons on the control surface will turn red.
When the shutdown sequence has finished the LCD select buttons on the control
surface will turn green, and the appropriate ones will also display text messages,
accordingly.
4
Make sure that the shutdown sequence has finished, and then switch off the
mains on/off isolator switches (rear of control centre), one at a time.
5
Disconnect the two mains connectors from the sockets on rear of PRO2 Control
Centre.
PRO2 Live Audio System
Owner's Manual
During the shutdown sequence, when the LCD select buttons on the
control surface are red, do not switch off the mains power supply, and
when they are green, it is OK to switch off the mains power supply.
Preferences
Shutdown System.
31

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PRO2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

Pro2c

Table of Contents

Save PDF