Midas PRO2 Owner's Manual page 340

322
Error Message
artefact creation
policy violation
artefact deletion
policy violation
artefact import
violation
artefact load
policy violation
artefact rename
policy violation
artefact
replication policy
violation
artefact save
policy violation
attempt to
overwrite existing
data (overwrite
not enabled)
b
bad device
bad device ID
bad directory
bad file
System(s) Problem
File and The creation of this file type
Automation is not allowed.
File and The deleting of this file type
Automation is not allowed.
File and The importing of this file type
Automation is not allowed.
File and The loading of this file type is
Automation not allowed.
File and The renaming of this file type
Automation is not allowed.
File and The replication of this file
Automation type is not allowed.
File and The saving of this file type is
Automation not allowed.
File and The operation to save or copy
Automation to the existing file is not
allowed, as files cannot be
overwritten.
File and Operation could not be
Automation carried out because the
device, that is, the internal
compact flash of the PRO2 or
USB memory stick (if
connected), does not contain
the required directory
structure.
File and The device identifier has not
Automation been recognised.
File and The file system path does not
Automation terminate in a directory.
File and The file system path does not
Automation terminate in a file.
Appendix D: Troubleshooting
Solution
Avoid using this type of
operation.
Avoid using this type of
operation.
Avoid using this type of
operation.
Avoid using this type of
operation.
Avoid using this type of
operation.
Avoid using this type of
operation.
Avoid using this type of
operation.
Avoid using this type of
operation.
• If the device is the internal
compact flash of the PRO2,
this could be an indication of
a serious problem. Contact
Midas Technical Support.
• If the device is the USB
memory stick, check that the
device has not been
disconnected from the control
surface.
If you are exporting a file to a
USB memory stick, check
that it has not been
disconnected from the control
surface.
This is highly unlikely to occur
in practice, but is an
indication of a serious error.
Contact Midas Technical
Support.
This is highly unlikely to occur
in practice, but is an
indication of a serious error.
Contact Midas Technical
Support.
PRO2 Live Audio System
Owner's Manual