Midas PRO2 Owner's Manual page 338

320
>> To proceed after an error message appears
1
Heed the error message.
2
Click OK.
3
Take the appropriate action for that particular error. Refer to Table 14 "List of
error condition messages" on page 320 and Table 15 "List of error description
messages" on page 321.
Automation error messages
An automation error message may be generated by any of the following:
• An attempt to perform a copy and paste is ignored.
• Attempting to assign notes to a scene. The text "There was an error setting the
scene note" will be displayed.
• An attempt to assign MIDI data to a scene is ignored.
• An attempt to set the navigation mode, that is, switching rehearsal mode on or off,
is ignored.
• An attempt to skip/unskip a scene or point scene; see "Rehearsals" on page 173.
• An attempt to assign the default store option is ignored.
• An attempt to assign the rehearsal mode state for all scenes is ignored. (This
functionality is not available to the user.)
• An attempt to set the MIDI navigation mode is ignored. (This functionality is not
available to the user.)
• An attempt to modify the scene list mode is ignored.
Error condition messages
The following table contains the possible error condition messages for both the file and
automation systems. These messages comprise the first line of the error message as
they appear on the GUI.
Table 14: List of error condition messages
System Type
File
File
File
Automation
Automation
Automation
Automation
Automation
Error Message
Failed to copy file
Failed to delete file
Failed to rename file
Failed to copy point scene to
point scene
Failed to create a new show
Failed to delete point scene
Failed to expand point scene
range
Failed to initiate point scene
storage
Appendix D: Troubleshooting
Fault Condition
Attempting to copy a file.
Attempting to delete a file.
Attempting to rename a file.
Attempting to copy one point scene
to another.
Attempting to create a new show.
Attempting to delete a point scene.
Attempting to expand point scene
range, that is, by inserting an extra
10 point scenes, for example,
expanding scene 10.00 will add
point scenes 10.10, 10.20 etc., up to
10.90.
Attempting to initiate point scene
storage, that is, when clicking Store
on the GUI. (A successful outcome
is to display the 'Store' window.)
PRO2 Live Audio System
Owner's Manual