Midas PRO2 Owner's Manual page 206

188
Table 7: Incoming event options
When ... (from top list downwards)
Any IO Box,
IO ID1 to IO ID
18
Table 8: Description of all event option parameters
Parameter
Aftertouch
Any IO Box
Any MIDI Channel
Channel n
Closure n
Control Change
FOH MIDI PORT
GPIO TX
IO IDn
Jump
Last
MIDI TX
Any MIDI Note Off,
Channel,
Note On,
Channel 1 to
Channel 16 Aftertouch,
Pressure,
Control Change,
Program
Change,
Pitch Wheel
Description
How hard a key is pressed after it has been touched, that
is, it changes the pressure after the note has been hit.
Typically, aftertouch is useful for adding tremolo or vibrato
effects to a sound, just as a violin can add volume or pitch
changes to a sustained note using finger vibrato or addition
bowing intensity.
Parameters for Aftertouch are notes A0 to C7, with each
having a possible pressure of between 0 and 127. You can
also choose between Enable MIDI Byte 1 and Enable
MIDI Byte 2.
The trigger can be on any IO port of any IO box.
Any of the MIDI channels.
One of the 16 MIDI channels.
Provides a contact closure that can be programmed to open
or close in response to a MIDI event.
Select the control changes that can be applied to a note in
progress. For example, by altering the volume (not
velocity) or adding sustain to a note (holding it for longer).
Parameters are All Notes Off and Reset All. You can also
choose between Enable MIDI Byte 1 and Enable MIDI
Byte 2.
The trigger is via the MIDI port of the FOH DL251/DL252
Audio System I/O.
Selects a GPIO event.
The trigger is via a specific IO port.
Opens a specified scene on the PRO2.
Opens the last (previous) scene on the PRO2. This scene is
the same one that would be opened if you pressed the last
button.
Selects a MIDI event.
Chapter 22: Events (Automation)
Then do this...
Midi TX
GPIO TX
Last
Next
Now
Jump
Notes Event
X-Fade Event
Event
Parameters
(from top list
downwards)
For details, see
Table 7 "Incoming
event options" on
page 188
PRO2 Live Audio System
Owner's Manual