Midas PRO2 Owner's Manual page 211

About the crossfade Edit Event window
Using a crossfade mute
The Mute option of the Parameters list lets you initiate a mute at the end of a
crossfade down operation.
mute will turn on after this time has expired (provided it was off). If the crossfade is a
'crossfade up', the mute will turn off during the crossfade up time (provided it was on).
Crossfade set up section in the Edit Event window
The crossfade set up section (bottom of the Edit Event window) is where you set up
how the crossfade operates. Here you can set up the duration of the crossfade and the
rate at which it occurs. You can configure two crossfade rates per crossfade or keep its
rate constant throughout.
3
2
1
Figure 16: Crossfade set up section
Item
1
2
3
4
5
6
>> To quickly adjust the time and travel of the faders up/down
You can quickly adjust the % of Time and % of Travel parameters by dragging the
graph. Click anywhere on the line of the graph in the Edit Event window and drag to
where the parameters are as desired. Clicking while pressing the left button adjusts the
down travel, and doing the same with the right button adjusts the up travel.
PRO2 Live Audio System
Owner's Manual
For example, if you set a crossfade of two seconds, the
4 6
Element
% of Travel
number field
% of Time
number field
Faders Down field
Faders down
section
Faders up section
Graph
5
Function
Sets the initial travel distance of the control as a
percentage of the total distance of travel.
Sets the time for the initial travel of the control as a
percentage of the overall time.
Sets the time taken for the total travel (milliseconds)
of the control for a 'fader down' (or whichever control
is used) crossfade event. For the Faders Up field,
this sets the time taken for the total travel
(milliseconds) of the control for a 'fader up' crossfade
event.
For setting the crossfade down parameters.
For setting the crossfade up parameters.
Up/down crossfade graph.
193
Time