Midas PRO2 Owner's Manual page 129

Monitors (A and B)
Item
11
12
13
Delay (GUI only)
You can delay each monitor output signal (A and B) individually by up to
500 milliseconds (ms). This is done via the two delay sections in the Monitors screen.
This function does not have support on the control surface.
1
Monitor A and B delay sections on the GUI
Item
1
2
3
4
PRO2 Live Audio System
Owner's Manual
Description
left and right meters for the monitor (A or B) currently assigned to the
monitor section on the control surface.
Left monitor signal. On the control surface, it is the left monitor signal of
the current monitor assignment (A or B).
Right monitor signal. On the control surface, it is the right monitor signal of
the current monitor assignment (A or B).
2
4
Element
Control knob
Up/down spin
buttons
ON switch
Two delay value
fields
3
Description
Adjusts the monitor output signal delay in the range
0ms to 500ms.
Provide finer adjustment of the monitor output signal
delay.
Switches the delay on/off.
Show the current delay value in milliseconds (ms)
and metres (m).
111