Appendix H Parameters Protected By Safes; Overview - Midas PRO2 Owner's Manual

Appendix H: Parameters Protected By
Safes
This appendix shows the parameters affected/unaffected by each of the safe types (EQ,
DYN, MIC, AUTO, MUTE and FADER).
Note: The parameter areas for the scopes (store and recall) and the safes are, basically
the same. However, the way they are presented in their respective appendices is
different. This may provide you with a useful alternative when referring to this
material, should you prefer one more than the other (see Appendix F "Parameters
Affected By Scope" on page 337).

Overview

The following table provides a quick reference for finding the channel/group safe areas
in this appendix.
Channel EQ safe
or Group
Input "EQ safe"
channel on
page 388
Aux "EQ safe"
on
page 399
Return N/A
Matrix "EQ safe"
on
page 413
Master "EQ safe"
on
page 422
VCA N/A
group
PRO2 Live Audio System
Owner's Manual
DYN safe MIC safe
"DYN "MIC safe?"
(dynamic) on
safe" on page 392
page 390
"DYN "MIC safe"
(dynamic) on
safe" on page 402
page 401
N/A "MIC safe"
on
page 407
"DYN "MIC safe"
(dynamic) on
safe" on page 416
page 415
"DYN "MIC safe"
(dynamic) on
safe" on page 425
page 424
N/A N/A
AUTO safe MUTE safe
"AUTO "MUTE
(automatio safe" on
n) safe" on page 394
page 393
"AUTO "MUTE
(automatio safe" on
n) safe" on page 403
page 402
"AUTO "MUTE
(automatio safe" on
n) safe" on page 408
page 408
"AUTO "MUTE
(automatio safe" on
n) safe" on page 417
page 417
"AUTO "MUTE
(automatio safe" on
n) safe" on page 426
page 425
"Automatio "Mute
n safe" on (MTE) safe"
page 429 on
page 430
385
FADER
safe
"FADER
safe" on
page 395
"FADER
safe" on
page 404
"FADER
safe" on
page 409
"FADER
safe" on
page 418
"FADER
safe" on
page 427
"Fader
(FDR) safe"
on
page 430