Solo B - Midas PRO2 Owner's Manual

104
Table 4: Solo A destination controls
Control
PFL direct input
AFL direct input
Solo add
Solo clear
Solo PFL
Solo in place
(SIP)

Solo B

The solo B buttons are located next to the individual solo buttons (GUI only). With
solo B on, solo goes to the B bus and with solo B off, solo goes to the A bus. Solo B has
separate ADD, CLEAR and PFL controls that, in broadcast mode, can be used to
control those functions independently of solo A.
Options
-
-
• On (additive solos)
• Off (self-cancelling
solos)
• On (some solo A
solos)
• Off (no solo A solos)
• PFL (solo pre-fader)
• AFL (solo after-fader)
• On (SIP active)
• Off (SIP inactive)
Chapter 12: Soloing
Description
Direct inject to solo A from linked
console, active only while solo A is PFL.
Direct inject to solo A from linked
console, active only while solo A is AFL.
Disable self-cancelling solo A solos.
(When self-cancelling solos are
selected, that is, with solo add mode
off, the solo being cancelled will be
deactivated before activating a new
solo.)
Single button clearing of currently
active solo A solos.
Switch all current and future solo A
activations to send the solo A bus pre-
fader.
When active, SIP uses the console's
master outputs for the solo A material.
It does this by muting all input channels
that are not currently soloed to the solo
A bus.
It is not possible to activate SIP
accidentally. The SIP button has a
hinged clear plastic cover that has to
lifted up before the button can be
operated.
For SIP purposes, master outputs can
be the main master bus or, if
configured, a multi-channel output mix.
To be eligible for SIP muting, channels
must be input channels and set up to
solo to the solo A bus; channels with
any other combination are not
subjected to SIP muting.
Channels eligible for SIP muting that
are currently, or subsequently, muted
by a means other than SIP (that is,
local button press, auto-mute or scene
recall) remain muted regardless of the
SIP status. On removal of the
overriding mute, the mute is restored
according to the current SIP status.
PRO2 Live Audio System
Owner's Manual