Midas PRO2 Owner's Manual page 344

326
Error Message
r
required device
has files that are
in use
required device is
locked
s
scene capacity
violation
scene UID error
shell command
error
source point
scene is empty
specified file is
already locked
specified file was
not found
stdio stream error
stdio stream open
error
stdio stream seek
error
System(s) Problem
File and Another task is currently
Automation accessing file(s) on the
device, that is, the internal
compact flash of the PRO2 or
USB memory stick (if
connected).
File and Another task is currently
Automation accessing the device, that is,
the internal compact flash of
the PRO2 or USB memory
stick (if connected).
File and The scene cannot be stored
Automation to the show file, as it already
contains the maximum
number of scenes allowed.
File and The file being modified is
Automation damaged.
File and This is a critical internal error.
Automation
Automation Specified source scene is an
empty 'slot'.
File and Another task is currently
Automation accessing the file
File and The file could not be found on
Automation the specified device, that is,
the internal compact flash of
the PRO2 or USB memory
stick (if connected).
File and This is a critical internal error.
Automation
File and This is a critical internal error.
Automation
File and This is a critical internal error.
Automation
Appendix D: Troubleshooting
Solution
Try again.
Try again.
If necessary, delete one or
more of the other scenes.
The maximum capacity for a
show file is 500 scenes for a
512MB master controller
(MC) and 1000 scenes for a
1GB MC.
This is an indication of a
serious error. Contact Midas
Technical Support.
This is an indication of a
serious error. Contact Midas
Technical Support.
Only carry out this type of
operation on a scene that is
not empty.
Try again.
• If the device is the internal
compact flash of the PRO2,
this could be an indication of
a serious problem. Contact
Midas Technical Support.
• If the device is the USB
memory stick, check that the
device has not been
disconnected from the control
surface.
This is an indication of a
serious error. Contact Midas
Technical Support.
This is an indication of a
serious error. Contact Midas
Technical Support.
This is an indication of a
serious error. Contact Midas
Technical Support.
PRO2 Live Audio System
Owner's Manual