Midas PRO2 Owner's Manual page 353

Using the PRO2 updater
10
Click Quit and reboot to exit the
updater and automatically reboot
the PRO2. (You can exit the
updater later by clicking Quit
later.)
The GUI will display the screen
shown right.
Do not switch off the power
until the console has fully
rebooted.
11
When the PRO2 has fully rebooted, power cycle the system (including all I/O
boxes) to restart using the new software. Do this by powering the system down
and then powering it up again (see "Powering the PRO2 system" on page 30).
PRO2 Live Audio System
Owner's Manual
335