About The Edit Event Window - Midas PRO2 Owner's Manual

186

About the Edit Event window

You can edit the parameters of an event in the Edit Event window.
9
8
Item
1
2
3
4
5
6
7
8
9
Figure 15: Edit Event window
Description
Disable Event tick box, for choosing whether the event is missed out
(skipped) during a rehearsal.
TEST EVENT button, for executing the selected outgoing MIDI or GPIO
event using the current event parameters.
When... section for selecting the parameters that trigger the event.
Displays either one or three drop-down lists, depending on the whether the
event is selected as Outgoing or Incoming, respectively.
Time Offset section, for setting the period of time that the event happens
after it has been triggered. Zero = no offset.
Then do this... section, for choosing the type of event that you want.
Event Parameters section (see the "Programming events" on page 187).
CLOSE button, for closing the Edit Event window.
Incoming/outgoing selection section, for selecting whether the event is
triggered on the PRO2 or on an external device.
Text field, for displaying the user-configured event name.
Chapter 22: Events (Automation)
1
2
3
4
5
6
7
PRO2 Live Audio System
Owner's Manual