Subscriber Number Assignment - Panasonic KX-TD816E Installation Manual

419
Description
Selection
Default
Programming
Conditions
Feature References
4-104 System Programming
4.6

Subscriber Number Assignment

Assign the subscriber number which is assigned to a CO line by a
central office for Calling Line Identification Presentation or
Connected Line Identification Presentation.
• CO line number:
KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 54,
• Telephone number: 16 digits (max.)
All CO lines – Not stored
1. Enter 419.
Display: Telephone Number
2. Press NEXT.
Display: CO Line NO?–>
3. Enter a CO line number.
To enter CO line number 01, you can also press NEXT.
Display example: CO01: Not Stored
4. Enter a telephone number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new number.
5. Press STORE.
6. To program another CO line number, press NEXT or PREV,
or SELECT and the desired CO line number.
7. Repeat steps 4 through 6.
8. Press END.
• The valid characters are 0 through 9.
• To assign all CO lines to one selection, press the
this case, the display shows the contents programmed for CO01.
• In case of the KX-TD1232, CO 01 through CO 12 are for the Master
System and CO 13 through CO 24 are for the Slave, If available.
• CO09 through CO16 become available when the expansion unit KX-TD290
is installed in the KX-TD816 and CO25 through CO54 become available
when the expansion unit KX-TD290 is installed in the KX-TD1232.
• To display parts of the number which have scrolled off the display, press
or .
Section 3, Features,
Calling Line Identification Restriction (CLIR)
Connected Line Identification Restriction (COLR)
CO Line Programming
( =all CO lines)
( =all CO lines)
key at step 3. In