Extension Group Assignment - Panasonic KX-TD816E Installation Manual

602
Description
Selection
Default
Programming
Conditions
Feature References
4-128 System Programming
4.8 Extension Programming

Extension Group Assignment

Assigns each extension to an extension group. Extension groups
are used for Group Call Pickup and Paging – Group.
• Jack number: KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 64,
(
• Extension group number: 01 through 16,
• Disable (not belong) / Enable (belong)
All jacks-1/2 – Extension group 1:Enable
1. Enter 602.
Display: EXT Group Asn
2. Press NEXT.
Display: Jack NO?–>
3. Enter a jack number.
To enter jack number 01, you can also press NEXT.
To select the second part (-2), press NEXT after entering the jack number.
Display example: #01-1:EG01:Enabl
4. Enter the extension group number.
You can also keep pressing
group number is displayed.
5. Keep pressing SELECT until the desired selection is
displayed.
6. Press STORE.
7. To program another jack, press NEXT or PREV, or SELECT
and the desired jack number.
8. Repeat steps 4 through 7.
9. Press END.
• There is a maximum of sixteen extension groups. Each extension can
belong to more than one group.
• For the KX-TD1232, jack numbers 01 through 32 are for the Master
System and 33 through 64 are for the Slave, if available.
• For an explanation of jack numbering, see "Rotation of jack number"
on page 4-7 of the Installation manual.
• To assign all jacks to one extension group, press the
In this case, the display shows the contents programmed for Jack 01.
Section 3, Features,
Call Pickup, Group
Paging – Group
=all jacks, -1 = first part, -2 = second part)
or
Extension Group
(-1 / -2)
(-1 / -2)
( =all groups)
until the desired extension
key in step 3.