Table of Contents
Advertisement
4.6
CO Line Programming
Description
Selection
Default
Programming
Conditions
ISDN Line Number Assignment
Assigns your ISDN network line telephone number. Your
telephone number is sent to the called party with the CLIP (Calling
Line Identification Presentation) feature and to the calling party
with the COLP (Connected Line Identification Presentation) feature
offered by the ISDN network service.
• CO line number: KX-TD816 – 01 through 08
• Telephone number: 16 digits (max.)
All CO lines – Not stored
1.
Enter 418.
Display: ISDN CO NO.
2.
Press NEXT.
Display: CO Line NO?→
3.
Enter a CO line number.
To enter CO line number 01, you can also press NEXT.
Display example: CO01:Not Stored
4.
Enter a telephone number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To program another CO line, press NEXT or PREV, or
SELECT and the desired CO line number.
7.
Repeat steps 4 through 6.
8.
Press END.
• Each number has a maximum of 16 digits, consisting of 0 through 9.
• For the KX-TD1232, CO 01 through CO 12 are for the Master System
and CO 13 through CO 24 are for the Slave, if available.
• To display parts of the number which have scrolled off the display,
press
or
• CO 25 through CO 54 become available when the KX-TD290
expansion unit is installed in the KX-TD1232.
• Your telephone number will be informed to the called party if the
outgoing CLIR feature is disabled for the ISDN line in program [419]
"ISDN Outgoing CLIR Service Assignment".
KX-TD1232 – 01 through 54
.
418
33
Advertisement
Table of Contents
