Panasonic KX-TD816E Installation Manual page 232

R
R
edial, Automatic
Description
Conditions
Programming References
Feature References
Operation References
—User Manual
R
edial, Last Number
Description
Conditions
3-118 Features
This is a special feature for the digital proprietary telephones, that
provides automatic redialling of the last dialled, saved number or
call log, if the called party is busy. If the Last Number Redial,
Saved Number Redial, CO Incoming / Outgoing Call Log operation
or Notebook function is performed handsfree, the telephone set will
hang up and try again after a pre-determined period of time.
• Redial Repeat Time and Interval Time can be changed by system
programming.
• Pressing RECALL or FLASH/RCL button allows the system to cancel
this feature.
• If any dialling operation is done during Automatic Redial, this function
is finished.
• This feature is not available with KX-T7250.
Section 4, System Programming,
[209] Automatic Redial Repeat Times
[210] Automatic Redial Interval Time
Section 3, Features,
Redial, Last Number
DPT Features,
Redial, Automatic
Every telephone in the system automatically saves the last
telephone number dialled to a CO line and allows the extension
user to dial the same number again.
• With a proprietary telephone, REDIAL button is used to carry out Last
Number Redial. With a single line telephone, the feature number is
used.
• The memorized telephone number is replaced by a new one if at least
one digit to be sent to a CO line is dialled. Dialling a CO line access
code alone does not change the memorized number.
• Certain types of proprietary telephones allow automatic multiple
redialling (Automatic Redial).
3 Features
Redial, Saved Number