Account Code Entry - Panasonic KX-TD816E Installation Manual

3 Features
Conditions
Programming References
In Verified-All Calls mode, the user must always enter a pre-
assigned account code when making any of the following calls
unless it has previously been stored in memory:
• Call Forwarding – to CO Line
• Last Number Redial
• Line Access
• Notebook Function
• One-Touch Dialling
• Pickup Dialling
• Saved Number Redial
• Station Speed Dialling
• System Speed Dialling
In Verified-Toll Restriction Override mode, the user can enter a pre-
assigned account code only when the user needs to override toll
restriction.
In Option mode, the user can enter any account code if needed.
• An account code can be stored into Memory Dialling (System / Station
Speed Dialling; Notebook Function; One-Touch Dialling; Pickup
Dialling; Call Forwarding – to CO Line).
• The Account button may be used in place of the feature number. A
flexible button on the proprietary telephone set can be programmed as
the Account button.
• Account code entry after CPC detection must be done within 15
seconds. Otherwise, SMDR call record is activated and entry becomes
impossible afterwards.
• If disconnection signal is selected in program [990], field (3) and Recall
function is enabled in field (15), the Verified
allowed to make an outside call using the same line with Recall
function.
• If an account code is appended to a call, specified display telephone
users can see the charge for the call (Charge Fee Reference).
• In any mode, emergency dial numbers stored in program [311]
"Emergency Dial Number Set" can be dialled out without an account
code entry.
• If the account code stored in location 01 of the programming table is
used, the dialled number is not printed out to SMDR (Private Call).
Section 4, System Programming,
[005] Flexible CO Button Assignment
[100] Flexible Numbering, Account code entry
[105] Account Codes
[508] Account Code Entry Mode
[990] System Additional Information, Fields (3), (15)
A
-
All Calls extension is
Features 3-3