Panasonic KX-TD816E Installation Manual page 465

4.9 LCR Programming
Description
Selection
Default
Programming
Conditions
LCR Exceptional Code Set
Assigns dialling numbers that are excepted from LCR routing plans
of the specified carrier. They are sent out to a CO selected from
automatic access CO line groups.
• Program address: 7X20, X: 1-8 (carrier number)
• Location number: 01 through 80
• Exceptional code: 7 digits (max.)
All locations – Not stored
1. Enter a program address (7X20).
Display example: EXCP Digit C1
2. Press NEXT.
Display: Location NO?–>
3. Enter a location number.
To enter location number 01, you can also press NEXT.
Display example: 01:Not Stored
4. Enter an exceptional code.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new code.
5. Press STORE.
6. To program another location, press NEXT or PREV, or
SELECT and the desired location number.
7. Repeat steps 4 through 6.
8. Press END.
• There is a maximum of 80 exceptional codes for each carrier. Each
code has a maximum of 7 digits, consisting of 0 through 9, and
The character " " can be used as a wild card character.
7X20
System Programming
.
4-151