1.1 DECT Programming
[673] PS CLIP / COLP Number Assignment
Description
Assigns a CLIP / COLP number to each Portable Station.
Selection
• PS registration number:
KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 64,
• CLIP/COLP number: 16 digits (max.)
Default
All PSs – Not Stored
Programming
1.
Enter 673.
Display: PS CLIP/COLP
2.
Press NEXT.
Display: NUM PS?
3.
Enter the PS registration number.
You can also keep pressing NEXT until the desired PS registration number is displayed.
Display example: PS01:NON MEMORIZZATO
4.
Enter a CLIP / COLP number.
To change the current entry, press CLEAR and the new number.
5.
Press STORE.
6.
To programme another PS, press NEXT or PREV, or SELECT and the desired PS
registration number.
7.
Repeat steps 3 through 6.
8.
Press END.
Conditions
• Each CLIP / COLP number can be a maximum of 16 digits, consisting of 0 through 9.
• To assign all PSs to one selection, press the
the contents programmed for the PS 01.
Feature References
Calling / Connected Line Identification Presentation (CLIP / COLP)
Calling / Connected Line Identification Restriction (CLIR / COLR)
34
( = all PS registration numbers)
key in step 3. In this case, the display shows
DECT Programming