Panasonic KX-TD816E Installation Manual page 205

3 Features
L
ine Preference – Outgoing (Idle Line / No Line / Prime Line)
Description
Conditions
Programming References
Feature References
Operation References
—User Manual
A proprietary telephone user can select a desired outgoing line
preference to originate calls from the following three line
preferences:
(1) Idle Line Preference:
When you go off-hook, you are connected to an idle line.
An idle line is automatically selected from the pre-assigned
lines.
(2) No Line Preference:
No line is selected when you go off-hook. You must select
a line to make a call.
(3) Prime Line Preference:
When you go off-hook, you are connected to the pre-
assigned line. Assign a line as your prime line beforehand.
• Setting a new line preference feature cancels the previous setting.
• To set Prime Line Preference, one prime line is selected from intercom
or CO lines.
• The CO lines used by users must be connected by programming.
• To select Idle Line Preference, CO lines available for the user should be
programmed. Also CO lines available for Automatic Line Access
should be assigned.
• The user can override the Idle / Prime Line Preference temporarily to
select a specific line. To select it, press the desired line access button
(INTERCOM or CO button) before going off-hook or pressing the SP-
PHONE / MONITOR button; or if Full One-Touch Dialling is enabled,
press One-Touch Dialling, DSS, REDIAL, or SAVE button.
Section 4, System Programming,
[005] Flexible CO Button Assignment
[103] Automatic Access CO Line Group Assignment
[400] CO Line Connection Assignment
[605]–[606] Outgoing Permitted CO Line Assignment — Day / Night
Station Programming.......................................................User Manual
Flexible Button Assignment – Group-CO (G-CO) Button, Loop-CO (L-
CO) Button, Single-CO (S-CO) Button
Preferred Line Assignment – Outgoing
Section 3, Features,
CO Line Connection Assignment – Outgoing
Basic Operation,
Making Calls
L
Features 3-95