4.7
COS Programming
Connected Line Identification Restriction
Description
Selection
Default
Programming
Conditions
Feature References
Enables or disables the Connected Line Identification Restriction
(COLR) Service.
• COS number: 1 through 8,
• Enable / Disable
All COS – Disable
1.
Enter 517.
Display: COLR
2.
Press NEXT.
Display: COS
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1: Disable
4.
Keep pressing SELECT until the desired selection is
displayed.
5.
Press STORE.
6.
To program another COS, press NEXT or PREV, or
SELECT and the desired COS number.
7.
Repeat steps 4 through 6.
8.
Press END.
To assign all COS to one selection, press the
case, the display shows the contents programmed for COS 1.
Section 3, Features,
Connected Line Identification Restriction (COLR)
( =all COS)
NO?→
key at step 3. In this
System Programming
517
4-125.0