2.4.8 Doorphone and Door Opener
Connection
Doorphone Installation
A maximum of two doorphones (KX-T30865) and two door
openers is permitted.
1. Loosen the screw to separate the doorphone into halves.
screw
2. Attach the base cover to the wall with two screws.
Note
Two kinds of screws are included; choose the one that is
appropriate for use depending on your wall type:
3. Connect the wires from the main unit to the screws located in the
front cover.
To the main unit (See the
following page.)
4. Re-attach the halves and re-install the screw.
Type 1: When the doorphone plate has been
fixed to the wall.
Type 2: When you wish to install the
doorphone directly to the wall.
Installation
2-43