Panasonic KX-TD816E Installation Manual page 168

F
Connection References
Programming References
Feature References
Operation References
F
lexible Numbering
Description
Flexible Feature Numbers
3-64 Features
• If XDP is disabled for the jack, DPT and SLT may be used as
Parallelled Telephones. APT and SLT also can be used as Parallelled
Telephones.
Section 2, Installation,
2.3.4 EXtra Device Port (XDP) Connection
Section 4, System Programming,
[600] EXtra Device Port
Section 3, Features,
Parallelled Telephone
Not applicable.
The numbers used for the access codes of system features and the
number used for extension numbers are not fixed. They can be set
as required provided there are not any conflicts. Feature numbers
can be from one to three digits, utilizing numbers "0 through 9" as
well as " " and "#." Extension numbers can be two to four digits
in length. Any number can be set as the leading first or second
digit. If one digit is assigned as the leading digit, some extensions
have 2-digit numbers and some have 3-digit numbers. If two digits
are assigned as the leading digits, some have 3-digit numbers and
some have 4-digit numbers.
Number
01 1st hundred extension block
02 2nd hundred extension block
03 - 16 3rd through 16th hundred extension block
17 Operator call
18 Automatic line access / LCR
19 CO line group line access
20 System speed dialling
21 Station speed dialling
22 Station speed dialling programming
23 Doorphone call
24 Paging – external
25 Paging – external answer / TAFAS answer
3 Features
Feature
Default
2
3
None
0
9
8
6
60
61
62
42