Panasonic KX-TD816E Installation Manual page 65

2.4.2 CO Line Connection
KX-TD182
To Terminal Board or Modular
Jacks from the Central Office.
B
For details, refer to Section 2.5 "Auxiliary Connection for
†
Power Failure Transfer."
Note: If connection is made using a TJF (Test Jack Frame), ensure
the maximum cable length between the TJF and the point on
entry into the CO card is less than 30 m (minimum distance 0 m).
(Optional Card)
Jacks for Power
Failure Transfer †
CO 3, CO 4
CO 1, CO 2
View of Connector
A
A
CO 2
B
A
CO 1
B
Installation 2-31