4.7
COS Programming
Description
Option mode:
Verified – All Calls mode:
Verified – Toll Restriction Override mode:
Selection
Default
Programming
Conditions
Feature References
Account Code Entry Mode
There are three account code modes: Option, Verified-All Calls and
Verified-Toll Restriction Override. This program determines the
mode to be used by each Class of Service (COS).
The user can enter any account code, if needed.
The user must always enter a pre-assigned account code to make a
CO call.
The user must enter a pre-assigned account code when the user
needs to override toll restriction.
• COS number: 1 through 8,
• Option / Verify – All (Verified-All Calls) / Verify – Toll
(Verified-Toll Restriction Override)
All COS – Option
1.
Enter 508.
Display: Call Accounting
2.
Press NEXT.
Display: COS NO?–>
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Option
4.
Keep pressing SELECT until the desired selection is
displayed.
5.
Press STORE.
6.
To program another COS, press NEXT or PREV, or
SELECT and the desired COS number.
7.
Repeat steps 4 through 6.
8.
Press END.
• To assign all COS to one selection, press the
case, the display shows the contents programmed for COS 1.
• Station programming is used to define the Account Codes for the
Verified modes.
• Program [601] "Class of Service" is used to assign a Class of Service to
each extension.
Section 3, Features,
Account Code Entry
Toll Restriction Override by Account Code Entry
( =all COS)
key at step 3. In this
System Programming
508
4-119