661-662
PS Outgoing Permitted CO Line Assignment — Day / Night
Description
Selection
Default
Programming
8-54
DECT Portable Station Section
8.4 DECT PS System Programming
Determines which CO lines can be accessed by a PS in both the day
and night modes. PS users can make outgoing outside calls using
the assigned CO lines.
• PS registration number: KX-TD816 – 01 through 16,
• CO line number : KX-TD816 – 01 through 08,
• Enabl (enable) / Disab (disable)
All PSs – all CO lines – Enable – Day / Night
1.
Enter a program address (661 for day or 662 for night).
Display example: PS CO Out Day
2.
Press NEXT.
Display: PS NO?→
3.
Enter the PS registration number.
You can also keep pressing NEXT until the desired PS registration
number is displayed.
Display example: PS01:CO01:Enabl
4.
Enter the CO line number.
You can also keep pressing
number is displayed.
To change the current entry, enter the new number.
5.
Keep pressing SELECT until the desired selection is
displayed.
6.
Press STORE.
7.
To program another PS, press NEXT or PREV, or SELECT
and the desired PS registration number.
8.
Repeat steps 4 through 7.
9.
Press END.
KX-TD1232 – 01 through 64,
( =all PS registration numbers)
KX-TD1232 – 01 through 24,
( =all CO lines)
or
until the desired CO line