Panasonic KX-TD816E Installation Manual page 182

I
I
ntercept Routing
Description
Conditions
Programming References
Feature References
Operation References
3-74 Features
Provides automatic redirection of incoming outside calls. There are
two types of Intercept Routing. In the first case, a call cannot be
placed to the called party. This is called Rerouting. In the second
case the call is not answered within a programmed time period.
This is called Intercept Routing – No Answer (IRNA).
The following items can have the Intercept Routing destination.
• CO Line Group
• Extension
• Hunting Group
• Intercept Routing applies to DIL 1:1, DIL 1:N, TAFAS, Call
Forwarding, and Station Hunting.
• The final destination of intercepted calls must be programmed for day
and night modes. There are four possible destinations:
1) an extension
2) an external pager
3) a hunting group
4) a phantom extension
• Intercept Routing is activated as shown below, depending on the
combination of incoming type and called destination.
Extension
including Operator
Assigned CO line
DIL 1:N
group
Registered
DIL 1:1
extension
Registered
DDI
extension
No more Intercept
Intercept
Routing
• If Call Forwarding to CO Line feature is set at the IRNA destination,
the call will be forwarded to the specific outside party.
Section 4, System Programming,
[203] Intercept Time
[409]–[410] Intercept Extension — Day / Night
[620]–[621] Extension Intercept Routing — Day / Night
None
Not applicable.
3
External Pager/
Internal ISDN/
Phantom Extension
No incoming calls
are received.
Assigned CO line
group
Assigned CO line
group
No more Intercept
Routing
Features
Hunting Group
No incoming calls
are received.
Assigned hunting
group
Assigned hunting
group
Assigned hunting
group