Panasonic KX-TD816E Installation Manual page 488

990
System Additional Information
Area Field
5 (35) Assigns whether or not the new page will
start whenever printing out the data in the
Hotel Application feature.
(36) Assigns whether or not to print out the data
when the system receives a call and a call is
answered.
(37) Assigns whether an extension number or a
DDI number is used when a DDI call
comes in or the CLIP and COLP feature
becomes available.
(38) Assigns how to change the number through
the ISDN line into the extension number
which receives incoming DDI calls.
(39) Disables or enables sending dial tone after
6
seizing a CO line.
(40) Reserved
(41) Assigns whether the system disconnects the
CO line or not if nothing is dialled after
seizing a CO line.
(42) Reserved
(43) Selects the way to access CO line to apply
LCR.
(44) Assigns if pressing the HOLD button twice
acts as Exclusive Hold or Hold Retrieve.
(45) Assigns whether the system displays the
authorization code while programming in
program [7X24] "Authorization Code Set."
(46- Reserved
47)
4-174.0 System Programming
4.11
Description
Option Programming
(contd.)
Selection Default
0 : enable
1 : disable
0 : enable
1 : disable
0 : DDI
transformation
number
1 : extension
number
0 :
The number
transformed in [111]
1 :
The number equals the
number from the
ISDN line minus the
subscriber's number
programmed in [419].
0 : disable
1 : enable
0 : disconnect
1 : do not
disconnect
0 : Dial 9 or press
L-CO button.
1 : Dial 9, press
L-CO button,
press G-CO
button or press
S-CO button.
0 : Hold Retrieve
1 : Exclusive Hold
0 : display
1 : do not display
References
1
1
0
• CLIR
• COLR
• Direct Dialling
In (DDI)
0 Direct Dialling
In (DDI)
0 None
0 None
1 Least Cost
Routing (LCR)
1 • Call Hold,
Exclusive
• Call Hold
Retrieve
1 None