Printer Connection - Panasonic KX-TD816E Installation Manual

2.3.7 Printer Connection

Note
2-22 Installation
A user-supplied printer can be connected to the EIA (RS-232C)
connector (25-pin) on the main unit. The printer is used to print out
SMDR call records and system programming data.
Connect the EIA (RS-232C) printer connector to the EIA
connector. Cables must be shielded; the maximum length is 2 m.
EIA
Connector
Serial Interface
(RS-232C)
The KX-TD1232 is illustrated as a main unit.
The pin configuration of EIA (RS-232C) connector is as follows:
Pin
Signal Name
No.
1 FG Frame Ground
2 SD (TXD) Transmitted Data
3 RD (RXD) Received Data
4 RS (RTS) Request To Send
5 CS (CTS) Clear To Send
6 DR (DSR) Data Set Ready
7 SG Signal Ground
8 Data Carrier Detect
CD (DCD)
20 ER (DTR) Data Terminal
Ready
Serial Printer
Circuit Type
EIA CCITT
AA 101
BA 103
BB 104
CA 105
CB 106
CC 107
AB 102
CF 109
CD 108.2