Installation; Location Of The Optional Units - Panasonic KX-TD816E Installation Manual

Digital super hybrid system.

Hide thumbs Also See for KX-TD816E:

Table of Contents

Installation

Unit Connectors

To protect the printed circuit boards (P-boards) from static electricity, do

not touch parts on the P-boards in the main unit and on the optional units.

One 8-Station Line Unit (KX-TD170) and either one CO

Line/ISDN Line Unit (KX-TD180, KX-TD280, or KX-TD290) can

be installed to any expansion area. You must use the KX-TD170-

when you install the KX-TD290. The former KX-TD170 does not

work properly with the KX-TD290. Please see the back of the unit

and check " " is marked.

Remove the cover plate(s)

on the front cover.

• When starting the system for the first time or performing System Data

Clear, the application for location will use practical installation instead

of the system default setting.

• System Programming is required for location identification.

Refer to program [109], "Expansion Card/Unit Type," in Section 4.

Default: Area 1= 4-CO Line Unit, Area 2= 8-Station Line Unit

MODEL NO.KX-TD170

8-Station Line Unit,

4-CO Line Unit,

2-ISDN S0 Line Unit,

1-PRI ISDN Line

Unit, KX-TD290

Table of Contents