Panasonic KX-TD816E Installation Manual page 136

C
Conditions
Connection References
Programming References
Feature References
Operation Reference
—User Manual
3-37.1 Features
• It is required to name CO lines and extensions by system programming.
• With the CLIP feature, the ISDN line informs the system of the caller's
telephone number. To display the name, the system compares the
informed number with the System Speed Dialling Numbers stored in
program [001] and if a match is found, determines the caller's name by
using the System Speed Dialling Names stored in program [002].
• The display DPT (KX-T7230, KX-T7235, KX-T7433 or KX-T7436)
user can record the call information received by the CLIP feature (CO
Incoming Call Information Log feature).
• If the assigned information cannot be displayed, it will be shown
according to the following priority:
→CO Line →DDI
Caller
Section 2, Installation,
2.4.2 CO Line Connection
Section 4, System Programming,
[001] System Speed Dialling Number Set
[002] System Speed Dialling Name Set
[003] Extension Number Set
[004] Extension Name Set
[012] ISDN Extension Number Set
[013] ISDN Extension Name Set
[421] CO Line Name Assignment
[622] Incoming Call Display
Section 3, Features,
CO Incoming Call Information Log
DPT Features,
CO Incoming Call Information Display
3 Features