Panasonic KX-TD816E Installation Manual page 447

4.8 Extension Programming
ISDN DDI Number / ISDN Extension Number Transformation
Description
Selection
Default
Programming
Conditions
Used to convert a DDI number to an ISDN extension number in
order to send an incoming DDI call to a specific extension if you do
not want to use your ISDN extension number as the DDI number.
• Port number: KX-TD816 – 01 through 04
KX-TD1232 – 03 through 06, 09 through 12
• DDI Number: 1 through 6 digits / Blank (no number)
All ports – Blank (no number)
1. Enter 619.
Display: ISDN-EXT DDI
2. Press NEXT.
Display: Port NO?→
3. Enter a port number.
To enter port number 01 or 03, you can also press NEXT.
Display example: #03:
4. Enter a DDI number.
To delete the current entry, press CLEAR and enter the new number.
To assign no number, press CLEAR.
5. Press STORE.
6. To program another port, press NEXT or PREV, or
SELECT and the desired port number.
7. Repeat steps 4 through 6.
8. Press END.
• There is a maximum of 4 DDI numbers for KX-TD816 and 8 DDI
numbers for KX-TD1232. Each DDI number can be one through six
digits, consisting of 0 through 9.
• For the KX-TD1232, port numbers 03 through 06 are for the Master
System and 09 through 12 are for the Slave, if available.
• For an explanation of jack numbering, see "Rotation of jack number"
on page 4-7.
System Programming
619
4-142.1