Ps Registration - Panasonic KX-TD816E Installation Manual

8.4 DECT PS System Programming
Description
Selection
Default
Programming

PS Registration

Assigns a registration number and an extension number to each PS.
Steps 1 through 5 and 22 through 24 must be operated with your
display PT, and steps 6 through 21 with the PS whose registration
number is to be set.
(With a display PT)
• PS registration number: KX-TD816 – 01 through 16
• PS extension number: 2 through 4 digits
(With a PS)
• DECT system number: 1 through 4
• PS password: 4 digits
• System lock password: 1 through 4 digits
All PSs – Not stored
(With a display PT)
1. Enter 650.
Display: PS Registration
2. Press NEXT.
Display: PS NO?→
3. Enter the PS registration number.
Display example: PS01:Not Stored
4. Enter the PS extension number.
Display example: PS01:Ext 281
5. Press STORE.
• Display (if enabled): Executing
Continue programming from step 6 with a PS within five minutes.
• Display (if disabled): Rejected
The Cell Station (CS) may not be connected or not working. After
connecting the CS or resetting the PBX, wait for at least one minute
and try again from the beginning.
(With a PS)
6. Slide the Power switch ON.
7. Press the Function button.
Display: KEY
8. Press the Book button twice.
Display: PROGRAMMING
9. Press the Auto/OK button.
KX-TD1232 – 01 through 64
DECT Portable Station Section
650
8-41