Ps Data Line Security - Panasonic KX-TD816E Installation Manual

8.4 DECT PS System Programming
Description
Selection
Default
Programming
Conditions
Feature References

PS Data Line Security

Sets or cancels the Data Line Security mode on a PS basis.
• PS registration number: KX-TD816 – 01 through 16,
• On / Off
All PSs – Off
1. Enter 668.
Display: PS Data Mode
2. Press NEXT.
Display: PS NO?→
3. Enter the PS registration number.
You can also keep pressing NEXT until the desired PS registration
number is displayed.
Display example: PS01:Off
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another PS, press NEXT or PREV, or SELECT
and the desired PS registration number.
7. Repeat steps 4 through 6.
8. Press END.
• To assign all PSs to one selection, press the
case, the display shows the contents programmed for the PS which has
the lowest PS registration number.
Section 3, Features
Data Line Security
KX-TD1232 – 01 through 64,
( =all PS registration numbers)
key in step 3. In this
DECT Portable Station Section
668
8-59