Charge Rate Assignment - Panasonic KX-TD816E Installation Manual

4.2 Manager Programming
Description
Selection
Default
Programming

Charge Rate Assignment

Assigns the rate to each CO line.
• CO line number: KX-TD816 – 01 through 08, 09,
(9=for KX-TD290,
KX-TD1232 – 01 through 24, 25,
(25=for KX-TD290,
• Charge rate: 9 digits max. (including the decimal point)
0.01
1. Enter 016.
Display: Charge Rate Asn
2. Press NEXT.
Display: CO Line NO?→
3. Enter a CO line number.
To enter CO line number 01, you can also press NEXT.
Display example: CO01: 0.01
4. Enter a charge rate (to the left of the decimal point).
To delete the current entry, press CLEAR.
5. Press .
6. Enter a charge rate (to the right of the decimal point).
To delete the current entry, press CLEAR.
7. Press STORE.
8. To program another CO line, press NEXT or PREV, or
SELECT and the desired CO line number.
9. Repeat steps 4 through 7.
10. Press END.
=all CO lines)
=all CO lines)
System Programming
016
4-35.2