Isdn Line Number Assignment - Panasonic KX-TD816CE Installation Manual

418
Description
Selection
Default
Programming
Conditions
Feature References
34
4.6

ISDN Line Number Assignment

Assigns your telephone number of the ISDN network line. Your
telephone number is informed to the called party with the CLIP
(Calling Line Identification Presentation) feature offered by the
ISDN network service.
• CO line number: KX-TD816 – 05 through 08
• Telephone number: 16 digits (max.)
All CO lines – Not stored
1. Enter 418.
Display: ISDN CO NO.
2. Press NEXT.
Display: CO Line NO?→
3. Enter a CO line number.
To enter CO line number 05 for KX-TD816 or 09 for KX-TD1232,
you can also press NEXT.
Display example: CO09:Not Stored
4. Enter the telephone number.
To delete the current entry, press CLEAR. To change the current
entry, press CLEAR and the new number.
5. Press STORE.
6. To program another CO line, press NEXT or PREV, or
SELECT and the desired CO line number.
7. Repeat steps 4 through 6.
8. Press END.
• In the case of KX-TD1232, CO09 through CO12 are for the Master
System and CO21 through CO24 are for the Slave, if available.
• To display parts of the number which have scrolled off the display,
press or
• Your telephone number is informed to the called party if outgoing CLIR
feature is disabled for the ISDN line by program [419] "ISDN Outgoing
CLIR Service Assignment."
Section 3, Features,
CO Incoming Call Information Display
CO Incoming Call Information Log
Direct Dialing In (DDI)
CO Line Programming
KX-TD1232 – 09 through 12, 21 through 24
.