Panasonic KX-TD816E Installation Manual page 44

2.3.2 Extension Connection
for Proprietary Telephones, Single Line Telephones and DSS Consoles
(KX-TD816: Jack 1 through Jack 8, KX-TD1232: Jack 1 through Jack 16)
Wire Specifications
Connection
6-pin plug
KX-TD816
2-10 Installation
In making an extension line connection, use twisted pair cable for
installation. The wire specifications for extensions are as follows:
Wire
Diameter of conductor
Diameter including coating
Use 6-pin plugs (included). There are 8 plugs to connect extensions
to jacks 1 through 8 for KX-TD816, and 16 plugs to connect
extensions to jacks 1 through 16 for KX-TD1232. Mis-connection
may cause the system to operate improperly. See Section 6.1.1
"Installation" and 6.1.2 "Connection" before connection.
1. Insert required telephone wires into the holes in a plug.
Fix the transparent part into the black part.
Note: Do not strip the wires. Insert the wires all the way into the plug.
P2
L
A
B
H
P1
2. Insert the plug into an extension jack in the main unit.
4CO/ISDN
To extensions (Jacks 1 – 8)
Solid wire
ø 0.4 – ø 0.65 mm
ø 0.66 – ø 1.05 mm
Jack 4
Jack 3
Jack 2
P2
L
A
Jack 1
B
H
P1
Jacks 1 through 8 are
located from bottom to top.