Panasonic KX-TD816E Installation Manual page 198

L
L
ED Indication, CO Line
Description
Flashing light (winks) patterns
Slow flash
Moderate flash
Rapid flash
Conditions
Programming References
3-88 Features
The LED (Light Emitting Diode) indicators of the buttons
associated with CO lines tell the line conditions with a variety of
lighting patterns. This allows the user to determine which lines are
idle and which lines are in use. The table on the next page shows
the lighting patterns and line conditions according to the CO button
type.
LED Indicator
Off
Green On
Green slow flash
Green moderate flash
Green rapid flash
Red On
Red slow flash
1 s
Red slow flash indication appears on the S-CO button only.
Section 4, System Programming,
[005] Flexible CO Button Assignment
Station Programming.......................................................User Manual,
Flexible Button Assignment – Group-CO (G-CO) Button, Loop-CO (L-
CO) Button, Single-CO (S-CO) Button
3
CO Line Status
Idle
I-use
I-hold
I-Exclusive Hold
Hold Recall / Incoming call
Other-use
Other-hold
Features