Panasonic KX-TD816E Installation Manual page 478

806-807
EIA (RS-232C) Parameters — Port 1 / Port 2
Conditions
Feature References
4-164 System Programming
4.10 Resource Programming
7. Press STORE.
8. Press NEXT to program word length.
Display example: Word Lengt:8bits
9. Keep pressing SELECT until the desired selection is
displayed.
10. Press STORE.
11. Press NEXT to program parity bit.
Display example: Parity:Mark
12. Keep pressing SELECT until the desired selection is
displayed.
13. Press STORE.
14. Press NEXT to program stop bit.
Display example: Stop Bit:1bit
15. Keep pressing SELECT until the desired selection is
displayed.
16. Press STORE.
17. Press END.
• The following combinations are invalid.
Parity Word Length
Mark
Space
Space
• The program address of the out-of-service system port is unacceptable.
Section 3, Features,
Station Message Detail Recording (SMDR)
Stop Bit
8 2
8 1
8 2
(contd.)