Isdn Layer 1 Active Mode - Panasonic KX-TD816E Installation Manual

423
Description
Selection
Default
Programming
Conditions
Feature References
4-108 System Programming
4.6 CO Line Programming

ISDN Layer 1 Active Mode

Assigns the active mode of Layer 1 on ISDN port basis.
• Port number: KX-TD816 – 01 through 04,
KX-TD1232 – 01 through 12,
• Permanent / Call
All ports – Permanent
1. Enter 423.
Display: L1 Active Mode
2. Press NEXT.
Display: Port NO?–>
3. Enter a port number.
To enter a first port, you can also press NEXT.
Display example: #03:Permanent
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another port, press NEXT or PREV, or
SELECT and the desired port number.
7. Repeat steps 4 through 6.
8. Press END.
• Port numbers 01 through 06 are for the Master System and 07 through
12 are for the Slave, if available.
• To assign all ports to one selection, press the
case, the display shows the contents programmed for a first port.
• After this assignment, you should reset the system so that this
assignment is effective.
Section 3, Features,
ISDN Extension
( =all ports)
( =all ports)
key in step 3. In this