Panasonic KX-TD816E Installation Manual page 165

3 Features
E
mergency Call
Description
Conditions
Programming References
Feature References
Operation References
—User Manual
E
nd-to-End DTMF Signalling (Tone Through)
Description
Conditions
Programming References
Feature References
Allows the extension user to dial out a pre-assigned emergency
number after seizing the CO line.
• Emergency numbers are allowed to call even in the following cases;
• in Account Code – Verified mode
• in any toll restriction level
• after the pre-assigned charge limit is reached
• in Electronic Station Lockout
• A maximum of ten emergency numbers are assignable. Any number
can be stored as an emergency number. (999) and (112) are already
stored by default settings.
• The LCR feature is not available for the emergency call.
Section 4, System Programming,
[311] Emergency Dial Number Set
None
DPT Features, SLT and ISDN Telephone Features;
Emergency Call
DTMF signalling is required for access to special network services
offered by some telephone companies. This system allows the
proprietary telephone user to send DTMF signals to the line during
an established call.
• If the dial type of the line is assigned to DTMF, Tone Through mode is
established automatically after the dialling sequence is finished and the
call is established.
• If the dial type of the line is assigned to dial pulse, Tone Through mode
is established after the dialling sequence is finished and the " #"
buttons are pressed (Pulse to Tone Conversion).
• This function also applies to extension and conference calls.
No programming required.
Section 3, Features,
Dial Type Selection Pulse to Tone Conversion
Features
E
3-61