136
ISDN DDI Number / Phantom Extension Number Transformation
Description
Selection
Default
Programming
Conditions
Feature References
4-69.7
System Programming
4.3
System Programming
Used to convert a DDI number to a phantom extension number in
order to send an incoming DDI call to a specific extension.
• Location number: 001 through 128
• DDI Number: 1 through 6 digits / Blank (no number)
All locations – Blank (no number)
1.
Enter 136.
Display: Phantom DDI
2.
Press NEXT.
Display: Location NO?→
3.
Enter a location number.
To enter location number 01, you can also press NEXT.
Display example: 001:
4.
Enter a DDI number.
To delete the current entry, press CLEAR and enter the new number.
To assign no number, press CLEAR.
5.
Press STORE.
6.
To program another port, press NEXT or PREV, or
SELECT and the desired location number.
7.
Repeat steps 4 through 6.
8.
Press END.
• There is a maximum of 128 phantom DDI numbers. Each DDI number
can be one through six digits, consisting of 0 through 9.
Section 3, Features,
Direct Dialling In (DDI)