Starting The System For The First Time - Panasonic KX-TD816E Installation Manual

2.6

Starting the System for the First Time

KX-TD816
2-54 Installation
1. Set the power switch to "OFF."
2. Set the system clear switch to "CLEAR."
3. Plug the AC power cord into the system and an AC outlet.
4. Turn the power switch on.
5. Press the Reset button with a pointed tool.
(The power indicator will flash.)
6. Slide the system clear switch to "NORMAL" while the power
indicator is flashing (approximately within 10 seconds).
The system will be initialized with default values. The system will
also check the CO lines, extensions, and optional cards and units.
Power Indicator
System Clear
SYSTEM
CLEAR
Switch
CLEAR
NORMAL
RESET
Reset Button
To AC Outlet