Panasonic KX-TD816E Installation Manual page 544

8.2.5 Site Survey
Note
8-24 DECT Portable Station Section
3. To record the result;
3-1. Press
• Attention!!
All directory data will be cleared.
To return to the test result display,
press (Clear).
CLR
3-2. Press
• To clear all log data, press
(Flash).
3-3. Enter the log number
(0 through 9).
3-4. Press
• The result is recorded.
• The results of measurement for the 24 slots on the channel are saved
each time a channel is set. If the same channel is set, the new results
override the previous ones. Therefore, a measurement of 10 channels x
24 slots in total can be made.
• If correct results cannot be obtained (e.g., there are many error coun-
ters), change the allocation of the Cell Station and repeat the site sur-
vey to select the best location.
• When a slot is synchronised in step 2 ("SYNC" is displayed), the other
slots in the same channel show "OTHER".
• Please do not use several PSs for the test simultaneously. This may
cause interference problems, so that the test may not executed properly.
(Talk).
(Talk).
(Talk).
ALL BOOK DATA
IS CLEARED!!
ARE YOU SURE?
TALK=YES,TRANS=NO
LOG NO.?(0-9)
FLASH=ALL CLR
Example
LOG NO.?(0-9) 0
FLASH=ALL CLR
Example
LOG NO.?(0-9) 0
STORED