673
8.4
PS CLIP / COLP Number Assignment
Description
Selection
Default
Programming
Conditions
Feature References
8-64
DECT Portable Station Section
DECT PS System Programming
Selects the type of additional number to the CLIP and COLP
information when making and answering a call through an ISDN
line. You can select the type from one of the following:
DDI: Subscriber number + DDI number
None: Subscriber number + Optional number
• PS registration number: KX-TD816 – 01 through 16
• Types: DDI / Any number 1 through 6 digits
All PSs – DDI
1.
Enter 673.
Display: PS CLIP/COLP
2.
Press NEXT.
Display: PS NO?→
3.
Enter the PS registration number.
You can also keep pressing NEXT until the desired PS registration
number is displayed.
Display example: PS01:DDI
4.
Press SELECT until the desired selection is displayed and
enter the number, if required.
To change the current entry, press CLEAR and the new number.
5.
Press STORE.
6.
To program another PS, press NEXT or PREV, or SELECT
and the desired PS registration number.
7.
Repeat steps 3 through 6.
8.
Press END.
None
Section 3, Features
Calling / Connected Line Identification Presentation (CLIP / COLP)
KX-TD1232 – 01 through 64