Example Of Programming - Panasonic KX-TD816E Installation Manual

4.1.5 Example of Programming

Sample of Description
001 4.2 Manager Programming
(1)
System Speed Dialing Number Set
(4)
Description Used to program the System Speed
Dial numbers. These numbers are
available to all extension users. There
are 500 numbers from 000 through
499.
(5)
Selection • Speed dial number: 000 through 499
• Telephone number: 24 digits (max.)
(6)
Default All speed dial numbers – Not stored
(7)
1. Enter 001.
Programming
2. Press NEXT.
3. Enter a speed dial number.
4. Enter a telephone number.
5. Press STORE.
6. To program another speed dial
7. Repeat steps 4 through 6.
8. Press END.
The following programming instructions assume that you have
already entered the programming mode and that you will employ
method (2) on page 4-8.
Example: Program [001] "System Speed Dialing Number Set"
3)
(
(8)
Display: 001 SYS SPD
(9)
DIAL
(10)
Display: SPD Code?→
To enter speed dial number 000,
you can also press NEXT.
Display example:
(12)
000:Not Stored
To delete the current entry, press
(14)
CLEAR.
To change the current entry, press
CLEAR and the new number.
(15)
number, press NEXT or
PREV, or SELECT and the
desired speed dial number.
(18)
(2)
(1) Program address: This address is printed at the top
of every page to allow you to quickly find the
desired program.
(2) Running title: tells you which group the program
belongs to.
(3) Program title.
(4) Provides a more detailed description of the
program.
(5) Shows you choices that you can assign.
(6) Shows you the default (factory setting).
(7) Shows you programming procedures step by step.
• While programming, use the overlay.
• Before starting to program, enter the
programming mode. (See "Entering the
programming mode" on page 4-6.)
(8) Enter the program address.
(9) The display shows the program title. If your
(11)
telephone has soft buttons, the lower line shows
the functions that are currently assigned to them.
(10) Press either Soft 3 (NEXT) shown on the display
or the NEXT shown on the overlay.
(11) The message line advises you to enter a speed dial
number.
(12) If the telephone number has already been stored,
(13)
the number is displayed.
(13) Enter the telephone number that you want to store.
Your entry is displayed as you enter the digits.
(14) Pressing CLEAR erases the whole entry.
(15) Your entry is now stored.
The indicator lights red and a confirmation tone
lets you know that storage is complete.
(16) Select the best way for you to store another speed
dial number. Pressing the NEXT / PREV allows
(16)
you to select the next higher / lower speed dial
(17)
number. You can also keep pressing them until the
desired one is displayed. If you press SELECT
Explanation
System Programming 4-13