4.2
Manager Programming
Description
Selection
Default
Programming
Conditions
Feature References
System Speed Dialling Name Set
Assigns names to the system speed dial numbers assigned in
program [001] "System Speed Dialling Number Set." KX-T7235,
KX-T7431, KX-T7433 and KX-T7436 telephones show the stored
name when performing System Speed Dialling. The stored names
are applied to the CO Incoming Call Information Display / Log
features.
• Speed dial number: 000 through 499
• Name: 10 characters (max.)
All speed dial numbers – Not stored
1.
Enter 002.
Display: SPD Name Set
2.
Press NEXT.
Display: SPD Code?–>
3.
Enter a speed dial number.
To enter speed dial number 000, you can also press NEXT.
Display example: 000: Not Stored
4.
Enter a name.
For entering characters, see Section 4.1.3 "Entering Characters."
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new name
5.
Press STORE.
6.
To program another speed dial number, press NEXT or
PREV, or SELECT and the desired speed dial number.
7.
Repeat steps 4 through 6.
8.
Press END.
• Speed dial numbers are programmed in program [001] "System
Speed Dialling Number Set."
• There is a maximum of 500 names. Each name has a maximum of 10
characters.
• To go to another speed dial number at steps 3 through 6, press
SELECT and start with step 3.
Section 3, Features,
CO Incoming Call Information Display
CO Incoming Call Information Log
Special Display Features — System Speed Dialling
System Programming
002
4-19